SOFTWARE DOWNLOADDownload the latest version now!
Please download this file, saving it to your system, and then run it to install:Download
CLEARPOINT 2.1 SOFTWARE
(Version 188.8.131.52, 60 MB)
ClearPoint Weather Software runs on Windows 2000, XP, Vista, or 7.
An internet connection is required to receive weather data.
The minimum recommended system configuration is:
Intel Core or AMD Athlon processor
1 GB RAM
Screen resolution of 1024x768
A single ClearPoint Weather subscription entitles you to download and use the ClearPoint software simultaneously on up to three PCs. Although ClearPoint software is PC-based, it can be used on a Mac running virtualization software such as Parallels Desktop or VMware Fusion.
After downloading and installing the software, start it by clicking on the ClearPoint icon on your Desktop. Then, click on Options (the wrench icon) on the Control Panel on the right hand side of the display and the Options configuration window will appear. Next, click on the Subscription tab and enter your Subscription ID (Email address) and Password. Then click on Authenticate Now (you do not need to click on OK). You only need to click on Authenticate Now the first time that you use the software on a particular computer.Selecting Data and Setting Your Location
Once your Subscription ID and Password have been authenticated, the Data tab will open up. Select the data that you want to download. Review all customizable features by clicking on each of the other tabs Page 2 of 7 in this Options window: Display, Units and Devices tabs. You should see Wave data for the default location off the coast of West Africa centered on zero degrees latitude and zero degrees longitude. Double-click on the map and enter the coordinates for your location and click on Confirm (you can also just double-click anywhere on the map and click on Confirm if you do not need precise coordinates). If you have a GPS unit attached, click on the Options icon and choose the devices tab. Select the COM port to which your GPS unit is attached and click OK to save your changes. After a few minutes the GPS icon will turn green if a fix can be obtained.
If you have a GPS unit attached, click on the Options button and choose the Devices tab. Select the COM port to which your GPS device is attached. You may also need to configure the baud rate. Click OK to save your changes. After a few minutes, the GPS icon will turn green if a fix can be obtained. If you do not have GPS, or desire to set the location manually, first click on the GPS icon. Then click on the desired location on the map.Receiving Weather Data
Once the location has been set, the software will automatically start to download weather data for that location. If you do not receive weather data, then please insure that you have an active Internet connection and that you have entered your Subscription ID and Password correctly.
Once the location has been set, the application will automatically download weather data. There may be a delay of a few minutes until the download process begins. This delay is to allow time for an accurate GPS fix. If you do not receive weather data, then please ensure that you have an active internet connection connection, and that you have entered your subscription ID and password correctly.Support
You can contact support via email at firstname.lastname@example.org
or by phone at +1 310-285-8465.
Quick Reference GuideDownload
Download the latest version of the Quick Reference Guide here:
The ClearPoint weather client supports the display of bathymetric data. After downloading the global bathymetry data installer above, run it to extract the bathymetry data to your system.
Terms & ConditionsDownload
Download the Clearpoint Terms & Conditions